Earthing Equipments

 

  Copper Earth Rods

Copper Earth Rod

Earthing Equipments are made from high tensile-low carbon steel compelling with requirement of BS 4360 Grade 43 A. Each grounding rod is molecularly bonded by 99.99% pure, high conductivity copper bonding, each rod is treated with Benzol-triozole derivatives. Thread on rod are formed by roll threading process, giving thread extra strength, eliminating risk of chipping the thread while driving the rods in the ground.

Rod Dimension
(mm)

Diameter
of Thread

Actual Rod Die.
(mm)

Component
No.

09.5 x 1200 unthreaded 09.5 CCBR-9512
14.5 x 1200 9/16" 12.5 CCBR-1412
14.5 x 1500 9/16" 12.5 CCBR-1415
14.5 x 1800 9/16" 12.5 CCBR-1418
16.0 x 1200 5/8" 14.2 CCBR1612
16.0 x 1500 5/8" 14.2 CCBR-1615
16.0 x 1800 5/8" 14.2 CCBR-1618
16.0 x 2400 5/8" 14.2 CCBR-1624
20.0 x 1200 3/4" 17.2 CCBR-2012
20.0 x 1500 3/4" 17.2 CCBR-2015
20.0 x 1800 3/4" 17.2 CCBR-2018
20.0 x 2400 3/4" 17.2 CCBR-2024
25.0 x 2400 unthreaded 25.4 CCBR-2524
25.0 x 3000 unthreaded 25.4 CCBR-2530
    Solid Copper Earth Rods

Solid copper earth rods are made in two type. Externally threaded and internally threaded. Solid Copper earth rods are used where the factor of corrosion is very high and exceptionally long life is equable. Hence these rods are manufacture from pure and high conductivity hard drawn copper to BS 2874-C 101. These rods are also available with tin plating in order to blueuce the risk of oxidation and increasing shelf life.

Rod Detail for Internal Threaded Solid Copper Earth Rods

Rod Diameter
(mm)

Rod Length
(mm)

Component No.

16 1200 CSCR-1612
16 1500 CSCR-1615
20 1200 CSCR-2012
20 1500 CSCR-2015
  Copper Earth Clamps Bronze Earth Clamp Earthing Clamps Grounding Rods Clamps Copper Ground Rods Clamps

Copper Earth Clamp Bronze Earth Clamp Earthing Clamp Grounding Rod Clamps Copper Ground Rod Clamp

Electrical Brass Component manufacture a vast range of Earth ground earthing grounding Rod clamps in Naval Brass, Gunmetal and Aluminium. Special clamp as per customer specification can also be supplied for Earthing Equipment. . Rod to tape clamp

(A Clamp) Accommodate wide range of Copper / AI tape.
Rod to Conductor Clamp

(G clamp) Available in light and heavy duty. Accommodate conductor size from 10 mm 2 to 120mm 2 .

Rod to cable Lug clamp

(Type B) Available with M12 Bolt complete with Brass washer and nut.  
  Earthing Equipments Fittings

Driving Head :-  Reusable high tensile steel.

Coupling :- Brass or Aluminum Bronze.

Driving Spike:-  High strength alloy steel.

Internal Coupling:-  Phosphorous Bronze or high tensile Brass dowel.