Bronze and Gunmetal fittings can be used where de-zincification is a problem or in highly corrosive atmospheres. Product range includes Bushes, Nipples, Tees, Elbows, Crosses, Extensions, Plugs and Sockets.
Casting is done by high quality Shell moulding process using various alloys. Used for corrosive and sea water applications.
|Alloys||:||Gunmetal (CDA 936 / Red Brass 85-5-5-5), AB1, AB2, CDA 955, CDA 958 or any other Copper based alloy|
|Threads||:||BSP (G), NPT, NPS|
|Sizes||:||1/8’’ to 3’’|
An Elbow is installed between two lengths of pipes (or tubing) to allow a change of direction, usually a 90° or 45° angle. This could be equal or reducing type and could be Female or Male threaded.
Crosses are also known as four-way fittings. They have one inlet and three outlets (or vice-versa). Cross fittings are usually female threaded from all 4 sides.
A Tee, the most common pipe fitting, is used to combine (or divide) fluid / water flow. It is available in 3 way openings. They could be male or female threaded.
A Flange is a way of joining pipes, valves and pumps and they are usually welded or screwed. Flanges in various Bronze alloys are available in all pressure classes. Could be threaded or blind.
A Plug fits inside the pipe segment or fitting to which it is mated. In a threaded plumbing system, plugs have male threads. They seal a female threaded pipe.
THREE PIECE UNIONS
They consist of 3 parts: a male end, a female end and a nut. With the joining of the female and male ends, the nuts are used to provide the necessary pressure to seal the joint.
Bronze Barrel Nipples are available up to 8" in length and different thread combinations. They can be made from pipe or could be cast and machined.
SCOOP STRAINERS / HULL FITTING
Scoop - Strainers and Hull Fittings are the most common marine fittings made by us. They are known for excellent resistance to harmful sea corrosion. Widely used in boating and sea water industry.