Drives earthing charge / current carried from conductor in to the ground.
MECHANICAL CONNECTORS / LUGS
Wires are wedged between arched pressure bar and collar establishing positive contact and firm permanent grip.
To be used with elevation / Copper air rods.
INTERFACE TEST CLAMPS
For connecting 8 mm diameter conductor to 25 mm x 3 mm flat tape. Allows disconnection for test purposes.
Where re-inforcing bars are electrically continuous and are to be used as down conductors, these earth points allow easy access for the lightning protection and earthing system.
OBLONG TEST CLAMPS
This clamp is designed to join range of tape sizes.
SQUARE TAPE CLAMPS
For forming straight through, cross or ‘T’ joints in tape and bar.
ROD TO CABLE CLAMPS
Suitable for use with 8 mm solid conductor to be connected with 3/8" to 1" dia. earth rod.
ROD TO LUG CLAMPS
Clamps for Copper bonded rods are tapped to fit on threaded portion of rod. They connect rod with cable lug.
RAIN WATER PIPE (RWP) BONDS
Suitable for bonding tape to pipes, handrails etc.
ROD TO TAPE ‘A’ CLAMPS
Suitable for connecting combination of Copper tapes to earth rods.
FLEXIBLE BRAID BONDS AND CONNECTORS
These are used for bonding gates, doors, fences etc.
COPPER TAPER AIR RODS
To be installed with or without multiple points on Air Terminal base.
Used for supporting Rod to conductor with four fixing holes provided on it.
These are used with bare Copper tape.
DC TAPE CLIPS
These are used with bare Copper tape.
These are used for 4 - way Copper tape connection.
BARE COPPER TAPE
They carry earthing charge to earth plates or earth rods and also available with PVC coating.
EARTH ROD SPIKES
They help to drive flat earth rods into the ground.
GROUND PIPE CLAMPS
These are made from high strength Bronze through find Sand Casting. The Pipe Clamps are available for various pipe sizes from the ½”- 1” to 4”-6”. It can be used for wire sizes ranging from #2 AWG to #10AWG.
GROUND ROD CLAMPS
These are used to clamp Copper Wires to Ground Rods for burial in the earth. They are made from Copper Alloy such as C955 using fine Sand Casting. The hardware is available in Bronze and Stainless Steel. Range from 3/8” to 3/4".
BRONZE VISE CLAMPS
The clamps are made from Copper Alloy such as C955 using fine accurate shell moulding. These are used to connect various size Grounding Conductors, as well as pole line apparatus to Grounding Conductors.
ZINC PIPE CLAMPS
These are similar in shape and design of the Water Pipe clamps in Bronze. They are die cast from Zinc and then machined. The hardware used along with them is Zinc plated Steel. They are available in the pipe size 1/2” – 1”.
These are made from high quality Aluminium Bronze alloy; they are special shaped clamps and serve primarily as cable holder. They are made by fine Sand Casting along with Silicon Bronze hardware.
These are heavy duty cast spade shaped Bronze Terminals which are used to ground transformers. They come in a variety of sizes depending upon the number of holes and application required.
These are made from Copper alloy C955 (Aluminium Bronze) though fine sand casting, often used with a terminal assembly and used to ground transformer parts.
LAY IN LUGS
These are made from 99.99% Copper and have a serration at the end. The wire fixing screw is made from Stainless Steel. It is suitable for Aluminium as well as Copper conductors and finds great use in laying wires on a solar panel.
The Rebar Clamp is very similar to the Pipe clamp in its use and function. The clamp is made from high strength Bronze alloy and Steel hardware. The lay in section at the top makes it quick to install and easy to use.
TRANSFORMER TANK CONNECTORS
It consists of a rotating eye bolt which can accommodate cable either vertically or horizontally. The part is made from high strength Copper alloy such as C955. It is easy to use and can be used with a regular wrench.
These are internally threaded fittings and are used for connecting multiple threaded grounding rods and for protecting threads of earth rods from damage and corrosion.
These are used for connecting solid circular conductor to Copper grounding rod. They are made using high quality Copper and Bronze hardware.